ASSEMBLY
• To watch an assembly video, go to http://productvideo.co/ assembly/sears/nordic- track or use your mobile phone or smartphone to read the QR code at the right.
• Left parts are marked “L” or “Left” and right parts are marked “R” or “Right.”
• To identify small parts, see page 5.
• In addition to the included tool(s), assembly requires the following tools:
one Phillips screwdriver
• Assembly requires two persons.
• Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps.
one rubber mallet
Assembly may be easier if you have your own set of wrenches. To avoid damaging parts, do not use power tools.
1. With the help of a second person, place some | 1 |
|
|
of the packing materials (not shown) under the |
|
| |
|
|
| |
front of the Frame (1). Have the second per- |
| 6 |
|
son hold the Frame to prevent it from tipping |
| 104 | |
while you complete this step. |
|
| |
|
| 105 | |
Attach the Front Stabilizer (6) to the Frame (1) |
|
|
|
with two M10 x 122mm Screws (104) and two |
|
|
|
M10 Split Washers (105). |
|
|
|
Remove the packing materials from under the |
|
|
|
front of the Frame (1). |
|
|
|
|
| 1 |
|
2. With the help of a second person, place some of | 2 |
|
|
the packing materials (not shown) under the rear |
|
| |
|
|
| |
of the Frame (1). Have the second person hold |
|
|
|
the Frame to prevent it from tipping while you |
|
|
|
complete this step. |
|
|
|
Attach the Rear Stabilizer (2) to the Frame (1) |
| 2 |
|
with two M10 x 122mm Screws (104) and two |
|
| |
M10 Split Washers (105). |
| 1 |
|
|
|
| |
Remove the packing materials from under the |
|
|
|
rear of the Frame (1). |
|
|
|
| 104 | 105 |
|
|
|
| |
| 6 |
|
|
