Zhone Technologies IMACS-200 manual CPU Error Messages, CPU Troubleshooting

IMACS-200 General Features CPU Error Messages

4.10 CPU Error Messages

Refer to Appendix B in this Guide for further information on Error Messages regarding this port.

4.11 CPU Troubleshooting

On power-up, the IMACS-200 performs a self-test. This is the only diagnostic available for the first release of the unit. A “healthy” active IMACS-200 will have a green LED lit on the front panel.

The indications that a IMACS-200 is not on-line are:

•Continuous amber alarm LED on front panel or the LEDs continually cycling through the orange, green, red, blank sequence.

•Inability to communicate with the system by any means (VT-100 Term, Telnet, etc.).

If the IMACS-200 is determined to be faulty, replace it and return the faulty unit for repair to the location specified by your distributor.

General Features 4-45