Zhone Technologies IMACS-200 WAN ports WAN port User Screens and Settings, WAN Screen Actions

WAN ports WAN port User Screens and Settings

Table 6-1 summarizes the actions you can perform from this screen, and Table 6-2 lists the settings controlled on the screen along with their possible and default values.

					Table 5-1. WAN Screen Actions
	Action				Function
	Save		Saves changes to settings.
	Undo		Returns all settings to the last saved state.
	Refresh		Updates certain time-related information fields that are not automatically
			updated (i.e., performance and test data).
	Xcon		Displays the connections for the selected WAN port.
	Perf		Brings up the Performance Data Screen. See the Performance Data section of
			this chapter.
	Farstat		Shows the far-end network register data.
	Test		Initiates and monitors testing of all WAN port ports. Refer to the Test section
			of this chapter.
	Main		Returns to the System Main Screen. If changes are made to settings and not
			saved, you will be prompted to save or abandon your changes.
		Table 5-2. WAN Screen Option Settings and Defaults
Parameter					User Options	Notes	Default
STATE				stdby	actv		stdby
FORMAT				d4 esf		1	esf
LINE CODE				ami b8zs hdb3			b8zs or hdb3
FRAME				crc d-frm		2
TS16				cas ccs nos		2
EVEN BIT				norm inv		2
LINE LEN				110 220 330 440 550 660 0DB 7.5DB 15DB 22.5DB		1	110
LINE LB				off	on		off
LOCAL LB				off	on		off
LB GEN				off	llb plb nlb	1	off
LB DET				w/to off on		1	w/to
EER THRHD				10e-4 through 10e-9 none			10e-4
COM/NMS RP				none e-sa4		2	none

Notes: 1 is used to indicate a T1 field only, 2 indicates E1 only

STATE

In the standby state, the WAN port is electrically disconnected from the external network. Set State setting to stdby (standby) when setting up your WAN links, then changes it to actv (active) when starting normal operations.If the WAN is in loopback due to a command from a remote device, the loopback will be dropped if you switch to stdby.

WAN Ports 5-3