Zhone Technologies IMACS-200 manual Default IP Slot, Default IP TS, Default Gateway, RPT1 IP Addr

TCP/IP Network Management IMACS-200 General Features

DEFAULT IP SLOT

The Default IP Slot options are determined by the choice of Default IP Port. If none, local ether or ipr-fris selected for that parameter, this option will show n/a. If wan or sa4 is selected, the options for this parameter will show wan-1 through wan-4(the WAN card slot that transmits and receives NMS information).

DEFAULT IP TS

The Default IP Unit options are determined by the choice of Default IP Slot. If none, local ether, ipr-fror sa4 is selected for that parameter, this option will show n/a. If wan is selected above, the options for this parameter will be table, and the user will need to define the appropriate time slots to be used. (corresponding with the WAN port).

DEFAULT GATEWAY

The Default Gateway is used to control IP forwarding. IP datagrams are allowed being forwarded to the assigned IP address.

RPT1 IP ADDR

The RPT1 IP Address is the IP address of the first Network Management System host running an SNMP trap server.

RPT1 COMMUN STR

The RPT1 Community String holds the community string for the first NMS host running a SNMP trap server. The community string provides additional security by rejecting messages that do not contain the correct string. There must be some entry in this field to enable RPT1.

RPT2 IP ADDR

The RPT2 IP Address is the IP address of the second Network Management System host running a SNMP trap server.

RPT2 COMMUN STR

The RPT2 Community String holds the community string for the second NMS host running a SNMP trap server. The community string provides additional security by rejecting messages that do not contain the correct string. There must be some entry in this field to enable RPT2.

4-20 General Features