Zhone Technologies IMACS-200 FRM RLY State, Frm Rly Wan, Frm Rly Ts, FRM RLY Port, Frm Rly Lmi

IPR Configuration Screens and Settings IP Routing

Table 12-4. IPR Frame Relay Menu Option Settings and Defaults

Parameter		User Options	Default
FRM RLY STATE	actv stdby		stdby
FRM RLY WAN	wan-1 wan-2 wan-3 wan-4 owan-1 owan-2		none
	owan-3 owan-4
FRM RLY TS	1-24, 1-31		n/a
FRM RLY PORT	u-dte u-dce nni none		none
FRM RLY LMI	ansi ccitt	lmi none	n/a
FRM RLY T391	5-30		n/a or 10
FRM RLY T392	5-30		n/a or 15
FRM RLY N391	1-255		n/a or 6
FRM RLY DCE N392	1-10		n/a or 3
FRM RLY DTE N392	1-10		n/a or 3
FRM RLY DCE N393	1-10		n/a or 4
FRM RLY DTE N393	1-10		n/a or 4
FRM RLY LOOPBACK	off line	local	off

FRM RLY STATE

Activates or disables the Frame Relay port. Options are actv (active), or stdby (standby).

FRM RLY WAN

Point to the WAN or Server slot. Options are wan-1through wan-4.

FRM RLY TS

Can only be set for WAN case.

FRM RLY PORT

Frame Relay port type. Choices are u-dte,u-dce, nni, none.

FRM RLY LMI

LMI Encapsulation. Choices are ansi, ccitt, lmi, none.

FRM RLY T391

The Q.933 DTE polling interval, defining the time to send a status enquiry message.

12-8 IPR