Omega Vehicle Security OMP-MODL manual PC Requirements, Hyperware Installation

4... HYPERWARE™ S OFTWARE INTRODUCTION

PC REQUIREMENTS

To install and use HyperWare, the following minimum equipment is required:

♦386 or higher IBM PC compatible

♦4 Meg (minimum) of RAM memory

♦Mouse or other pointing device

♦Serial port for OMP-MODL connection (via Modem or RS-232 link)

♦Microsoft Windows 3.1x, 95 or NT

♦VGA display

♦3 Meg of Hard disk space

♦Windows supported / installed printer (optional)

HYPERWARE INSTALLATION

To install the HyperWare program onto your PC hard disk follow these steps:

1.Start Microsoft Windows.

2.Insert the HyperWare Program disk #1 into your floppy drive.

3.From the Program Manager'sFile menu, select Run, then type a:install (or b:install) then <ENTER>

Windows 95 or NT users should select Run from the Start button, then type a:install (or b:install) then <ENTER>

4.Follow the on screen directions for installing the software. Dialogs prompting for User input will display during the installation providing the opportunity to customize the installation. For most Users, selecting the default responses to the prompts will provide a fool-proof installation.

5.After installation, double-click on the new HyperWare icon (from within the Program Manager) to launch the HyperWare application.

UPGRADING HYPERWARE TO A NEW VERSION:

Instructions for upgrading HyperWare from a previous release are supplied with the new upgrade diskette.

4-2 USING THE MODULOGGER