Omega Vehicle Security OMP-MODL manual Password

Figure 5... -

12:

Password

lock

5... HYPERCOMM™ C OMMUNICATIONS

FYI: Probe Point is used for the icon name as connecting these icons to a node on a Net is somewhat analogous to putting a test meter probe on the Net nodes and reading a value.

If a Program Net that contains Probe Point icons is currently loaded into PC memory, then a Probe Point icon will display overlaying the PC.

Password

The logger contains a multi-level password system that can be used to foil unauthorized access via telephone modem or RS-232 connection. The logger password system allows for five passwords, a Master and four User passwords.

MASTER PASSWORD

The Master password allows access to all logger functions, including the ability to manage the User passwords. To enable or change the Master password, double-click on the Password icon (small lock graphic) in the upper left corner of the logger graphic in the HyperComm Window . A dialog will appear which allows the Master password to be changed, and the User passwords to be configured.

USER PASSWORDS

Up to four User passwords can be set. These passwords allow for specific control of access to individual logger functions. Access to the User password configuration dialog requires the Master password. To configure User passwords, double-click on the Password icon, enter the Master password, and click on the Configure button. A dialog will open allowing the User passwords to be configured. Enter user passwords in the four text boxes at the top of the dialog. Specific logger functions can then be checked to allow access to that function for that password.

CAUTION

Keep track of Passwords as they can not be disabled

via a serial link without knowing the Master

password.

USING THE OMP-MODL 5-15