Fujitsu Siemens Computers 2 manual Exit, Activating security, Changing the password

Exit Operations

be accessed without first entering a password.

4.10.2.3.1 Activating security

Select the Set/Change Password menu option. You will be prompted with the option to continue. Enter a Y .

Type a password for this KVM s2-1611 and press Enter. This password must be a minimum of 5 characters and can be up to a maximum of 12 characters (10 are visible). The password must consist of a combination of alpha and numeric characters.

You will be prompted to re-type the password. Once you complete this step, security will be active and you will not be able to access KVM s2-1611 termi- nal operations without the password.

4.10.2.3.2 Changing the password

Select the Set/Change Password menu option.

You will be prompted to type the old password and a new one.

Re-enter the new password to verify.

This password places your KVM s2-1611 terminal in a secure mode. This pass- word should be guarded like any network password and care should be taken to avoid forgetting or misplacing it. There are no means for recovering a lost pass- word.

4.10.2.4 Exit

This menu selection will return you to the ready prompt.

38 590-332-501E