![](/images/new-backgrounds/1172931/17293169x1.webp)
Operations | Setting or changing the password |
|
|
Figure 14: Security Dialog Box
4.4.6.2 Setting or changing the password
Type the new password in the New text box and press Enter .
Passwords must contain both alpha and numeric characters, are case sensi- tive and may be up to 12 characters long. Legal characters are:
In the Repeat box, type the password again and press Enter .
Click OK to change only your password, and then close the dialog box.
If you should lose or forget your password, you must return your switch. See theTechnical Support section for contact information.
4.4.6.3 Password protecting your console
Set your password as described in the previous procedure.
Select Enable Screen Saver.
Type the number of minutes for Inactivity Time (from 1 to 99) to delay activa- tion of password protection and the screen saver feature.
For Mode, select Energy if your monitor is Energy Star®compliant; otherwise select Screen.
Monitor Damage
Monitor damage can result from the use of Energy mode with monitors not compliant with Energy Star®.
(Optional) Click Test to activate the screen saver test which lasts 10 seconds
27 |