Fujitsu Siemens Computers manual Installing the KVM series2-1611 hardware

Installing/Configuring the KVM s2-1611 KVM series2-1611

3.3.1 Installing the KVM series2-1611 hardware

Connect a terminal or PC running terminal emulation software (such as HyperTerminal) to the configuration port on the back panel of the appliance using a RS232 DB9 null modem cable. The terminal should be set to 9600 baud, 8 bits, 1 stop bit, no parity and no flow control.

Plug the supplied power cord into the back of the appliance and then into an appropriate power source.

When you turn on the power, the Power indicator on the front of the unit will blink for 30 seconds while performing a self-test. Approximately 10 seconds after it stops blinking, press the Enter key to access the main menu.

3.3.2 Configuring the KVM series2-1611 hardware

You will see the Terminal Applications menu with six options. Select option 1, Network Configuration.

Figure 3: Network Configuration Menu

Select option 1 to set your network speed. When possible, you should set your connection manually without relying on the auto negotiate feature. Once

10 590-332-501E