Operations
then returns you to the Security dialog box.
Click OK.
4.4.6.4 Logging in to your console
Press any key or move the mouse.
The Password dialog box appears. Type your password, then click OK.
The Main dialog box appears if the password was entered pro perly.
4.4.6.5 Removing password protection from your console:
From the Main dialog box, click Setup - Security; the Password dialog box ap-
pears. Type your password, then click OK.
In the Security dialog box, single-click and press Enter or double-click in the
New box. Leave the box blank. Press Enter .
Single-click and press Enter or double-click in the Repeat box. Leave the box
blank. Press Enter .
Click OK to eliminate your password.
4.4.6.6 Enabling the screen saver mode with no password protection
If your console does not require a password to gain access to the Security
dialog box, proceed to step 2.
-or-
If your console is password protected, see the previous procedure, then go to
step 2.
Select Enable Screen Saver.
Type the number of minutes for Inactivity Time (from 1–99) to delay activation
of the screen saver.
Choose Energy if your monitor is Energy Star® compliant; otherwise select
Screen.
Monitor Damage
Monitor damage can result from the use of Energy mode with monitors
not compliant with Energy Star®.
(Optional) Click Test to activate the screen saver test which lasts 10 seconds
then returns you to the Security dialog box.
Click OK.
Enabling/exiting Screen saver mode28 590-332-501E