Omega Vehicle Security OMP-MODL manual Terminal Strip, Configured as outputs

3... INTERFACE MODULES

Digital Output Signal Connections:

To utilize an MLIM-8 channel as a Digital Output, connect the load positive lead to an Output terminal (Chan A, B, C, D. E, F, G, or H) and the load negative lead to one of the four Common terminals on the module terminal strip (Figure 3... -35). Note that all of the four Common terminals are interconnected and connect directly to the OMP-MODL circuit ground (see Figure 3... -32). Refer to Chapter 7 for steps to generate a Terminal Strip Wiring printout for use in making field wiring connections.

Terminal Strip
A
ChannelCommonD	Common	CommonH	Common
B	E F	G

1	2	3	4	5	6	7	8	9	10	11	12
LOAD											ML134
LOAD

Figure 3... -35: MLIM-8 terminal strip connections

(configured as outputs)

USING THE OMP-MODL 3-51