5... HYPERCOMM™ C OMMUNICATIONS

Is the modem power ON? (external modems only)

Is the local modem port selected correctly? If in doubt, select another serial port from within the SERIAL COMMUNICATIONS dialog box and retry.

Is the selected baud rate correct for the modem?

Is a working telephone line connected to the modem?

Is there another device using the telephone line (i.e. a fax machine)

Does the modem work with other communication programs? If not, this may indicate that the modem port is conflicting with another serial port.

Additional modem configuration and troubleshooting information is supplied within Appendix K.

VISUAL COMMUNICATIONS VIA HYPERCOMM

Once the serial link (via RS-232 or modem) is established, a complete cable will show between the logger and the PC and additional icons will overlay the logger graphic (Figure 5... -4). Depending on the type of link established, a modem or DB- 25 connector will display in the middle of the cable. At this time, control and interrogation commands can be sent to the logger.

HyperWare automatically recognizes and adapts to the model of logger to which it

5-8

USING THE OMP-MODL

 

Figure 5... -4: HyperComm serial communication window (connection established)

Page 95
Image 95
Omega Vehicle Security OMP-MODL manual Visual Communications VIA Hypercomm