Omega Vehicle Security OMP-MODL manual Interface Module Operational Instructions

3... INTERFACE MODULES

INTERFACE MODULE OPERATIONAL INSTRUCTIONS:

Each Interface Module has specific characteristics and instructions for set-up and use that are unique to that particular module. These instructions are included in following sections or provided with the Interface Module at the time of purchase. As Interface Modules are added to a User’s OMP-MODL, the instruction sheets provided should be added to this section of the manual.

The instructions for most Interface Modules include both hardware and software details. Software instructions will commonly be referenced from other sections of this manual such as in the chapter on HyperComm for the modem modules and the chapter on HyperNet programming for analog and digital Interface Modules.

Instruction sheets for the following Interface Modules are currently included in this section:

♦ML-BATT; Battery Pack Module

♦ML-DISP; Display and User Interface Module

♦MLIM-1; Analog (thermocouple, Vdc and Adc Interface Module (Configuration shared with MLAD-1 Module)

♦MLIM-2; Event, Frequency, Count Interface Module

♦MLIM-4; RTD, Thermistor, and Resistance Module

♦MLIM-8; Digital Interface Module (8 channel digital I/O)

♦MLIM-5 PCMCIA Memory Card Interface Module

♦MLIM-5 PCMCIA Memory Card Interface Module with 2400B modem

♦MLIM-5 PCMCIA Memory Card Interface Module with 14,400B modem

USING THE OMP-MODL 3-5