Omega Vehicle Security OMP-MODL manual HAP Function Icon, 11-103

11.. . APPENDIX A: MASTER ICON REFERENCE

HAP FUNCTION ICON

FUNCTION:

The HAP icon is used in conjunction with the Omega Engineering HyperWare Automation Program (HAP) application. Hap is a stand-alone application separate from HyperWare, that automates most of HyperWare’s communication functions. .. When the HAP icon’s input goes TRUE, the icon will initiate communication with a PC that is running the HAP application.The icon will tell HAP which functions to perform. based on the information entered in the configuration dialog. HAP will then proceed to perform those functions.

INPUTS:

Data/Logic Signal: Data type.

OUTPUTS:

Output Signal: Data type(Optional). The HAP icon turns on its output if it was unable to connect to HAP. The output will remain ON untill the next time the HAP icon fires off

ICON CONFIGURATION DIALOG BOX:

CONFIGURATION OPTIONS:

Icon Name: Specify the label for the icon. This name will show directly under the icon within the Program Net.

Output Name:Specify the label for the Output. This name will show directly under the Output terminal within the Program Net.

USING THE OMP-MODL 11-103