Omega Vehicle Security manual Determining OMP-MODL Program Net Probes Information, 10-3

10... HYPERTRACK™ R EAL-TIME DATA DISPLAY

CONSTRUCTING A HYPERTRACK NET

During a real-time tracking session, the OMP-MODL transmits values of the Probe Point icons to the PC via the serial link. These values are then processed through a HyperTrack Net running on the PC (in the HyperTrack window) and displayed.

HyperTrack Nets provide a means to perform additional processing of values from Probe Point icons before they are displayed. HyperTrack Nets can also provide storage of Probe Point icon values to a file on the PC while the real-time data is being received.

The HyperTrack Net is constructed much the same way as a Program Net is developed within HyperNet. The main difference is that a Program Net running in a OMP-MODL receives its data from various hardware channels such as thermocouples whereas the HyperTrack Net receives its data from the Probe Point icons contained in the Program Net in an Enabled OMP-MODL. Figure 10... -4 shows a completed HyperTrack Net.

Figure 10... -4: Example HyperTrack Net (developed within the HyperTrack

window)

Determining OMP-MODL Program Net Probes Information

Before a HyperTrack Net can be developed, the Probe Point icons contained within the associated OMP-MODL Program Net must be known. This information can be gained by downloading the Program Net from a serially connected OMP-MODL or by opening the Program Net from disk (assuming it was saved after development).

Receiving Probe Point Icons from a serially connected OMP-MODL):

1.Establish a serial connection with the OMP-MODL to be used during the HyperTrack session. At this time, the OMP-MODL has already been programmed with a

USING THE OMP-MODL 10-3