11... APPENDIX A: MASTER ICON FILE REFERENCE
REMOTE CONTROL FUNCTION ICON
FUNCTION:
The Remote Control icon has a logic output that can be controlled
INPUTS:
Update Clock: Output is updated to the last user selected state upon each Update clock pulse. For example, it the connected Update clock is set for 60 sec., and the output state is changed by the user via HyperWare(described below), the actual state of the output will not update until the icon receives an Update pulse which may be up to 60 seconds later.
OUTPUTS:
Output Signal: Logic type. The Remote Control icon updates its output after receiving a user generated command to do so from HyperWare.
For example, the portion of a net program depicted above shows posible uses for the Remote Control icon.The Remote Control icons labeled “Relay #1” and “Relay #2” are connected to the logger’s relay output icons. This would enable the user to control the state of the logger’s hardware relay outputs
| USING THE |
