Omega Vehicle Security manual OMP-MODL System Base, Interface Modules

1... INTRODUCTION

OMP-MODL System Base

The OMP-MODL System Base refers to the main data logger unit composed of a stack of two interconnected modules... the MLCPU-1 module and the MLAD-1 module. These two modules combined house the main microprocessor and support circuitry, memory, power supplies, A to D converter as well as 6 inputs (4 analog, 1 Cold Junction Compensation

ML-TOP

TOP PLATE

MLADC-1

MLCPU-1

ML-BACK

BOTTOM PLATE/HANGER

ML001

Figure 1... -1: OMP-MODL System Base w/ top and bottom

plates

temperature and 1 digital) and 4 outputs. The System Base can be used stand-alone as a 6 input / 4 output data logger (OMP-MNL) or expanded with the addition of Interface Modules, battery packs, and/or display modules. The System Base includes a connector bus that provides signal connections to the added Interface Modules.

Interface Modules

Interface Modules (See Figure 1... -2) are add-on layers that provide the interface to various types of inputs and output signals. The Interface Modules can be User installed onto the System Base then configured for the specific type of signal or sensor to be connected to the OMP-MODL. Interface Modules are configured via software and/or switch settings on the modules.

1-2 USING THE OMP-MODL