Omega Vehicle Security OMP-MODL manual Data Download

Figure 5...

-9:

Memory

icon

5... HYPERCOMM™ C OMMUNICATIONS

If a different Program Net is to be transferred, open the desired Program Net from within HyperNet, then return to the HyperComm window and drag the icon to the logger.

Refer to Chapter 6 for details on the transfer of Program Net to and from the PCMCIA card.

NOTE: If the target logger memory contains collected data, the User will be prompted to download or clear the data prior to reprogramming. Upon upload of the new Program Net, data in the logger memory will be lost.

NOTE: During the upload of a Program Net to the logger, several integrity tests are performed. One of the tests checks the size of the Program Net to insure that it will fit into the available logger memory. In the event that the Program Net is too large, reduce the number of icons and retry. Refer to the README file supplied with the HyperWare for an approximate maximum number of icons that can be included in a Program Net for that version of software.

Data Download

To transfer data from the logger memory to a file on the PC disk, click and drag the Memory icon overlaying the logger to the PC and release it. After a prompt dialog, the data will be downloaded. Upon completion of the serial data transfer, a filename will be requested by a pop-up dialog.

USING THE OMP-MODL 5-13