7... HYPERNET™ I CON BASED PROGRAMMING
speed,wthe LCD should not be displaying updating information (eg Probe Points, battery voltage, etc).
PROGRAM NET DOCUMENTATION
Two features are provided within the HyperNet Window to assist in documenting and the ensuing field wiring of the
HyperNet Printout
The actual Program Net display can be printed by selecting Print Net from the File menu.
NOTE: The PC must be set to 256 color mode in order to properly print the Net.
Terminal Strip Wiring Printout
A Terminal Strip Wiring listing can be generated and printed for the Program Net. This listing can then be used during the field wiring of the various I/O signals to the logger terminal strips.
Upon completion of the Program Net, select View Wiring/Connection list from the File menu, enter a filename, and the file will be generated and saved as an ASCII text file. A text editor will automatically open the file. The listing can then be printed from within the editor and carried with the
The Wiring Listing includes the connections for each of the I/O channels that is used in the Program Net as well as standard connections for External Power, the Digital Port and the CJC connector. Names assigned to Input and Output icons in the Program Net are used for channel identification.
At the bottom of the Wiring I/O Listing are various notes relative to other connections such as modem. These notes are imported from a file called NOTES.TXT which is supplied in HyperWare. Reminders and special installation comments can be added by the User to the NOTES.TXT file by editing the file with any text editor (such as Notepad). After editing, the revisions will appear on the WiringListing each time a listing is generated from within HyperNet.
PROGRAM NET UPLOAD TO THE OMP-MODL
After the Program Net has been checked and saved, clicking on the HyperComm Window button will return HyperWare to the HyperComm Window. The Program Net icon displayed on the PC graphic represents the last edited Program Net. Drag and drop the Program Net icon from the PC to the serially connected
Refer to Chapter 5, HyperComm Serial Communications for details of the Program Net serial link uploading procedure or to Chapter 6 for details on using the PCMCIA card.
USING THE |
