Panasonic PV-DV402 Playback Your Recordings, Playback using the LCD Monitor, Set the Power to VCR

Playback Your Recordings

Playback using the LCD

Monitor

You can also use the LCD monitor to playback your recording.

1POWER

180°

90°

90°

2LCD-OPEN 4PLAY

5STOP

3REWIND SEARCH

Before you begin

•Connect the Palmcorder to a power source. (pp. 14, 15)

•Insert a recorded cassette.

1 Set the POWER to VCR.

•The POWER lamp lights red.

•Be sure POWER is fully turned to the VCR position.

2 Press LCD-OPEN to unlock the LCD monitor and swing open.

3 Press (REWIND/SEARCH) to rewind the tape.

4 Press	(PLAY) to start playback.
5 Press	(STOP) to stop playback.

• When the tape reaches its beginning during rewind or rewind search, it will stop automatically.

Note

•When a tape recorded in LP mode on another digital video camera is played back on this unit, the picture may appear mosaic.

•Using the LCD monitor reduces battery operating time.

•You can place the Palmcorder on a table, etc. for viewing. Rotate the LCD Monitor 180° and swing it up against the Palmcorder body as shown.

Connecting Earphone (not supplied)

You can connect earphones (not supplied) to the PHONE Jack.

PHONE Jack

32
	Forassistance, pleasecall: 1-800-211-PANA(7262)orsende-mailto:consumerproducts@panasonic.com