Omega Vehicle Security OMP-MODL manual Digital Output Signal Connections

3... INTERFACE MODULES

Digital Output Signal Connections:

To utilize an MLIM-2 Output channel, connect the load positive lead to an Output terminal (Chan E, F, G, or H) and the load negative lead to one of the four Common terminals on the module terminal strip (Figure 3... -25).

Note that all of the four Common terminals are interconnected and connect directly to the OMP-MODL circuit ground. Refer to Chapter 7 for steps to generate a Terminal Strip Wiring printout for use in making field wiring connections.

Terminal Strip

	E F	G	H
ChannelChannelCommonChannelChannel

1	2	3	4	5	6
LOAD
					ML124

LOAD

Figure 3... -25: MLIM-2 Digital output terminal strip connections

USING THE OMP-MODL 3-37