
Figure 10...
HyperTrack
button
10... HYPERTRACK™ R
3.The
Reading Probe Point icons from a Program Net on disk:
If a copy of the Program Net that will be running in the
This method does not require establishing a serial link with the
1.Switch to the HyperNet Window by clicking on the HyperNet button.
2.Open the Program Net file
3.Switch to the HyperComm Window by clicking on the HyperComm button, and a Probe Points icon should be overlayed on the PC. (If the Probe Point icon is not displayed, the Program Net selected does not contain any Probe Point icons and a new Program Net should be selected/developed.)
1.From within the HyperComm Window, click on the HyperTrack button (or double click on the Probe Point icon overlaying the PC) and the HyperTrack window will appear with Probe Point icons displayed on the left edge of the workspace. These icons represent the Probe Point icons in the Program Net currently programmed in the
2.Once this Probe Point icon information is displayed on the workspace, it can be saved to a HyperTrack Net file (the filename extension *.PRB will be appended) by using the File/Save As
Note: The Program Net icon overlaying the PC in the HyperComm Window represents the last Program Net loaded from disk (in the HyperNet Window) or the last Program Net downloaded from a serially connected
Building the HyperTrack Net
Icons
Three icons are available on the Icon Toolbar for use in construction of the HyperTrack Net, a Math icon, a File icon, and the
USING THE |
|