5... HYPERCOMM™ C OMMUNICATIONS
Figure 5... -3: Serial Communications setup dialog box (Modem mode)
Baud:
Specify the baud rate rate that will be used to communicate between the PC and the local modem. Set this baud rate per the following table:
Local Modem Capability | Set Dialog Box Baud To: |
|
|
1200 baud | 1200 baud |
|
|
2400 baud | 2400 baud |
|
|
9600 or faster baud | 19,200 baud |
|
|
Table 5...
FYI: The remote modem (at the logger) will automatically adapt to the baud rate of the calling modem.
Redial:
If this box is checked, HyperWare will automatically make another attempt to call the logger if the first attempt fails for any reason. The time specified in the edit box is a delay time to wait before attempting the next call.
USING THE |
