Manuals / Apple / Computer Equipment / Network Card

Apple warranty Specifications, Apple Ethernet CS II Thin Coax Card

Models: CS II

1 25

Download 25 pages 4.52 Kb

Page 18

Image 18

Specifications

Apple Ethernet CS II Thin Coax Card

Connector	Ethernet IEEE 802.3– compliant BNC port
Cable	RG-58/U; 2-meter minimum
	length between devices
Terminator	50 ohm, BNC-type
Ethernet transmit/	10 megabits per second maximum
receive data rate
Power dissipation	Less than 2.5 watts, with an average of
	2.25 watts
Environmental	Operating temperature: 50˚ to 104˚ F
requirements	(10˚ to 40˚ C)
	Humidity: 20% to 95% noncondensing
Ethernet controller	Digital Semiconductor DECchip 21041

Apple Ethernet CS II Twisted-Pair Card

Connector	Ethernet 10BASE-T– compliant
	RJ-45 port
Recommended	Category 3, 26 gauge; 100 meters from
cable	card to hub, maximum
Ethernet transmit/	10 megabits per second data rate
receive	maximum
Power dissipation	Less than 1.25 watts, with an average of
	.9 watt
Environmental	Operating temperature: 50˚ to 104˚ F (10˚
requirements	to 40˚ C)
	Humidity: 20% to 95% noncondensing
Ethernet controller	Digital Semiconductor DECchip 21041

Page 18

Image 18

Apple warranty Specifications, Apple Ethernet CS II Thin Coax Card, Apple Ethernet CS II Twisted-Pair Card

Contents

About the Apple Ethernet CS II Card What’s in the box3. Remove the card from its antistatic bag Installing Your Apple Ethernet CS II CardThis procedure depends on the model you have Connecting Your Card to the Network 2. Turn on the computer’s power switch and start up the computerConnecting an Apple Ethernet CS II Twisted Pair Card Connecting an Apple Ethernet CS II Coax Card 6. Turn on your computer’s power switch and start up the computer Connecting an Apple Ethernet CS II AAUI Card 2. Turn on the computer’s power switch and start up the computerThe AAUI connector attaches to the card’s port Installing Your Software Installing the Ethernet softwareTo install Ethernet software 2. Double-click the Network Software Selector application to open it Setting the Network Software Selector1. Open the Apple Extras folder 4. Choose Quit from the File menuSetting your control panels for Ethernet Setting the AppleTalk control panel3. Choose Ethernet from the pop-up menu 5. Make any changes you want to the AppleTalk address 6. Close the AppleTalk control panelFor Apple Ethernet CS II Twisted Pair and Coax Cards only 5. Close the TCP/IP control panel Setting the TCP/IP control panel for Ethernet4. Make any changes you want to the configuration or the IP address 6. Click Save to save the changes you made in the TCP/IP connectionDisconnecting and Moving Your Computer Troubleshooting If the AppleTalk or TCP/IP control panel icon is missingIf Ethernet doesn’t appear in the AppleTalk or TCP/IP control panel If you don’t see network services listed in the Chooser If you can’t select Ethernet in the AppleTalk or TCP/IP control panelIf the system won’t let you change the network connection Specifications Apple Ethernet CS II Thin Coax CardApple Ethernet CS II Twisted-Pair Card 75 watt plus transceiver power dissipation Apple Ethernet CS II AAUI CardOperating temperature 50˚ to 104˚ F Humidity 20% to 95% noncondensingFor More Information Apple Ethernet CS II Card User’s GuideFCC statement for Apple Ethernet CS II Thin Coax Card m Move the computer farther away from the television or radioObservation des normes-Classe B Industry CanadaDOC Class B Compliance VCCI statement EU statementIndustry Canada DOC Class A ComplianceVCCI statement EU statement Contents Specifications