Apple CS II warranty Turn on your computer’s power switch and start up the computer

5.Attach your T-connector to the port on your card.

It may help to use two hands. With one hand, push the T-connector on the port. While still holding the T-connector, use the fingers on your other hand to lock the connector into place.

Pull the T-connector to test that it is locked securely to the port.

Port on card

	The T-connector locks
	the network cable
	(and terminator, if
	needed) to your card.
Cable from one	Cable from other
side of network	side of network

6.Turn on your computer’s power switch and start up the computer.

You’ve made all the necessary hardware connections. Next you’ll install and set up your network communication software. For instructions, turn to “Installing Your Ethernet Software” later in this booklet.

6