Connecting an Apple Ethernet CS II Coax Card
IMPORTANT Connecting your computer to the network will temporarily disrupt services to other users, so work quickly. To minimize the disruption, alert your network administrator before continuing these instructions.
1.Attach one end of the new cable for your computer to the
Be sure to twist and lock the cable’s connector to your
2.On the computer closest to your computer, detach the network cable (or terminator) from the
This disrupts network services for other users. Note: You can add a computer in the middle or at either end of the network.
3.Lock the free end of the new cable to the
4.If you are adding your computer somewhere in the middle of the network, lock the unattached network cable to your
This restores network services for other users.
When you add your Thin Coax Card, you must use a
Twist to lock both cables 
to a 
middle of the network. 
Network continues
Lock a terminator to a 
the end of the network.
5
