Apple warranty Connecting an Apple Ethernet CS II AAUI Card

Connecting an Apple Ethernet CS II AAUI Card

1.Plug the AAUI connector from your network transceiver cable into the AAUI port on your card.

You need a specific AAUI-compatible transceiver for the kind of media used for your network: thick coax, twisted-pair, thin coax, fiber-optic, or twisted-pair hub. The transceiver connects your computer to the main network cable.

The AAUI connector attaches to the card’s port.

The cable also connects to the appropriate AAUI-compatible transceiver for your network.

2.Turn on the computer’s power switch and start up the computer.

You’ve made all the necessary hardware connections. Next you’ll install and set up your network communication software. For instructions, turn to “Installing Your Ethernet Software” later in this booklet.

7