2.
Press [ 3 ] to record the general mailbox greeting. Do one of the following:
■To approve the greeting, press [ 1 ].
■To
■To exit without changing the greeting, press [ * ] [ 7 ].
Unlike some voice mail systems, PARTNER Voice Messaging allows you to record the general mailbox greeting from a remote location. For example, if you want to record instructions for inclement weather.
Changing the System Manager's Password
This section tells you how to change the System Manager's password (for mailbox 0) that is required for changing PARTNER Voice Messaging settings. The factory setting for mailbox 0 is 1234. To prevent unauthorized programming of the system, you should change the default password immediately after installation or any time the password has been reset. You must assign four digits for a password. It is recommended that you create a password from random, nonsequential digits.
You cannot reinitialize the System Manager's password. If you change the password and forget it, you can contact the National Customer Care Center at 1 800
To change the password for mailbox 0:
1 . If necessary, access the Programming Main Menu. If you are already at the Programming Main Menu, skip to Step 2.
A ) Call PARTNER Voice Messaging:
■If calling internally, press [ Intercom ] [ 7 ] [ 7 ] [ 7 ] or the programmed VMMsgs button (see programming instructions on page 33).
■ If calling from outside the system, press [ * ] [ R ] ([ * ] [ 7 ]) during the general mailbox greeting.
B)Enter [ 0 ] followed by the password for mailbox 0.
2.Press [ 5 ] to change the password.
The prompt asks you to enter your new password.
