3.Enter four digits for the new password.
The prompt asks you to
4.
The new password is now active.
5.Press [ * ] [ R ] ([ * ] [ 7 ]) to return to the Programming Main Menu or press [ * ] [ * ] [ 9 ] to exit programming, or hang up.
Reinitializing a Mailbox
To prepare a previously used mailbox for a new subscriber, you can reinitialize the mailbox. This procedure deletes any messages left in the mailbox and turns off the phone's message light (if on), erases the personal greeting (if recorded), and changes the password back to the factory setting (1234).
To reinitialize a mailbox:
1.If necessary, access the Programming Main Menu. If you are already at the Programming Main Menu, skip to Step 2.
A)Call PARTNER Voice Messaging:
■If calling internally, press [ Intercom ] [ 7 ] [ 7 ] [ 7 ] or the programmed VMMsgs button.
■If calling from outside the system, press [ * ] [ R ] ([ * ] [ 7 ]) during the general mailbox greeting.
B ) Enter [ 0 ] followed by the password for mailbox 0.
2.Press [ 6 ] to initialize mailboxes. The system plays:
Caution: Initializing a mailbox erases its greeting and messages. To exit without making any changes, press [ * ] [ 7 ].
3 . Do one of the following:
■Enter the number of the mailbox you want to initialize.
■Press [ * ] [ R ] ([ * ] [ 7 ]) to return to the Programming Main Menu without making changes.
