Lucent Technologies partner voice messaging card manual Partner Voice Messaging Initial Settings

PARTNER Voice Messaging

Initial Settings

The following are the initial settings for PARTNER Voice Messaging:

■Mailbox 1—the general mailbox—is assigned to extension 10.

■Mailbox 2 is assigned to extension 11.

■Mailbox 3 is assigned to extension 12.

■Mailbox 4 is assigned to extension 13.

■The following factory-set general mailbox greeting plays if a call is transferred to PARTNER Voice Messaging:

Welcome to the PARTNER Voice Messaging.

Please press [ 1 ] to leave a message.

■The following factory-set Personal Mailbox greeting plays for individual subscriber mailboxes (1–4):

Your party is not available. Please leave a message after the tone.

PARTNER ACS Initial Settings

Following are the initial settings for the PARTNER ACS system Release 1.1 or later when a PARTNER Voice Messaging PC Card is present:

■Virtual extensions 78 and 79 are assigned to the two voice ports on PARTNER Voice Messaging.

✏NOTE:

A virtual extension is an extension number that exists in system software only, and is not associated with a physical extension jack on a module.

■The Idle-Line Preference for extensions 78 and 79 is automatically set to Intercom First.

■The Intercom dial tone for extensions 78 and 79 is automatically set to Machine.