Extron electronic FOX T USW 103 manual Installation, Mounting the FOX T USW, Rear Panel Features

Installation

This section describes information for connecting and wiring the FOX T USW 103. Topics in this section include:

•Mounting the FOX T USW 103

•Rear Panel Features

•Making Connections

Mounting the FOX T USW 103

The FOX T USW 103 can be mounted in a rack, under a desk, or on a tabletop (see

Mounting on page 38 for more mounting details).

Rear Panel Features

POWER	1	2
12V

0.7 A MAX

RGB/R-Y, Y, B-Y

h a

3

HDMIHDMI

b

INPUTS	Tx Rx
	LINK
AUDIO	OPTICAL

c d

LINK

FOX T USW 103		REMOTE
	RS-232	CONTACT	RS-232
OVER FIBER ALARM
Tx Rx G 1 2	1 2 3 G	Tx Rx G

e f g

Figure 2. FOX T USW 103 Rear Panel Features

Input Connectors

AAnalog video connector — Connect a video source to the female 15 HD connector, labeled input 1.

BHDMI connectors — Connect a source device to either or both HDMI connectors, labeled inputs 2 and 3 (see Connecting HDMI Connectors on page 6). They can accept HDMI, DVI, or dual mode DisplayPort video sources.

CAudio connector — Connect an analog audio source to the 3.5 mm TRS jack. All three video inputs can share this audio input.

Tip (L)

Ring (R)

Sleeve ()

3.5mm Stereo Plug Connector (unbalanced)

Figure 3. Wiring for Unbalanced Stereo Audio

FOX T USW 103 Universal Switcher • Installation 4