Extron electronic FOX T USW 103 manual Device name, Information requests, Status request

Command	ASCII Command	Response	Additional Description
	(Host to Device)	(Device to Host)
Device name

NOTE: No blank or space characters are permitted. The first character must be a letter. The last character cannot be a minus or hyphen.

Set unit name	EX1^CN}	Ipn• X1^]	Set device name.
Set unit name to factory	E•CN}	Ipn• X1&]	Set device to default.
default
View unit name	ECN}	X1^]	View device name.
Information requests
Query general information	I	1LnkX%•2LnkX%•VidX%•AudX%• X1)• TX]
Query firmware version	Q	x.xx]
Query firmware build	*Q	x.xx.xxxx]
Query part number	N	60-1229-nn]
Query all firmware version	0Q	x.xx-x.xx]
Query updated FPGA version	35Q	x.xx]
Status request
View fiber link 1 status	1S	X%]
View fiber link 2 status	2S	X%]
View input video status	3S	X%X%X%]
View input audio status	4S	X%]
Request all signal status	5S	SigIX%X%X%• SigO-•2HdcpIX%•3HdcpIX%•HdcpO-]
Request HDMI signal status	6S	SigIX%X%•SigO-]
Request HDCP status	7S	2HdcpIX%•3HdcpIX%•HdcpO-]
NOTE: X% = On or off		0 = off or not detected
		1 = on or detected
X1) = SFP module type		SM = singlemode
		MM = multimode
X1! = Input selection		1 = VGA (input 1)
		2 = HDMI (input 2)
		3 = HDMI (input 3)
X1^ = Unit name		text string up to 24 characters (A-Z, 0-9, -). No blank
		or space characters are permitted. The first character
		must be a letter. The last character cannot be a hyphen.
X1& = Extron device name		FOX-T-USW-103

FOX T USW 103 Universal Switcher • Remote Control 18