Starting the Software
Start the Extron FOX Extenders Control Program as follows:
1.Open the FOX Extenders Control Program. The Communication Setup window appears.
Figure 10. Communication Setup Window Connection Methods
2.Select the desired connection method.
•To connect the software to the device through the rear panel Remote
•To connect the software to the device through the front panel USB connector, click the USB tab and select the Extron USB device from the Extron USB Device drop- down list.
3.Click the Connect button. The FOX Extenders Control Program window appears.
NOTE: Some controls and displays are available only when connected to specific devices.
Using the Software
For more configuration and control details, see to the FOX Extenders Control Program Help File for configuration and control details. Open the file using one of the following methods:
•Once the FOX Extenders Control Program is open, press the <F1> key on the keyboard.
•Once the FOX Extenders Control Program is open, select Contents from the Help menu.
•From the Windows Start Menu, select FOX Extenders Help from the FOX Extenders Control Program folder.
The main screen opens (see figure 12 on page 23).
FOX T USW 103 Universal Switcher • FOX Extender Control Program 21
