Savin G1619 manual Error Messages, Problem and Solution

Error Messages

Error Messages

If there is an error, one of the following messages may appear on the display. It might just flash up briefly, so if you are watching for errors, stay by the machine and check the display.

Message	Problem and Solution
Clear Misfed Orig. Remove original from ADF	Original misfeed
Cover	Remove originals from the Document Feeder.
	Set any pages of the original that were not
	scanned and send again.
	A document jam occurred during Immediate
	Transmission. Press the {OK}key, and then re-
	send the page which has not been sent.
	An error occurred during Immediate Trans-
	mission. Press the {OK} key, and then resend
	the original.

	Note
	❒ There may be a problem with the machine
	or the telephone line (for example noise or
	cross talk). If the error re-occurs frequently,
	contact your service representative.
Reset Original(s) and press Start	Original jammed during Memory Transmis-
	sion. Reset originals that have not been scanned.
Memory is Full.Storing Stopped.	After you press the {OK} key, you can select
	whether to transmit pages which have been
	stored in memory or to delete those pages.
	Check the number of transmitted pages on the
	Communication Result Report when you se-
	lect to transmit those pages.
Exceeded the Max.Cannot Add	You cannot dial any more numbers. When
	these files have been sent and their fax num-
	bers are deleted from memory, additional fax
	numbers can be dialed.

4

63