Savin G1619 manual Line Type

Using Key Operator Settings

JEnter the Memory Lock ID (4-dig- its) with the number keys.

If you make a mistake, press the {Clear/Stop} key and try again.

KPress the {OK} key.

If you want to enter another item, repeat the above steps from step I.

L Press the {User Tools} key to re- turn to the standby display.

Line Type

You must register the Line Type be- fore you connect the machine to the line.

Note

❒This function is not available in some areas.

❒If you do not know the type of line you are connected to, select "Tone" and dial a trial number. If the con- nection was successful, your Line Type is "Tone", if it was not, set the Line Type to "Pulse" and dial a trial number. If the connection was suc- cessful, your Line Type is "Pulse".

Limitation

❒If you do not correctly set the Line Type, you will be able to receive messages, but you may not be able to send them.

To register the Line Type, perform the following procedure.

A Press the {User Tools} key.

B Press 0 or 1 until "4. Fax Fea- tures" is displayed.

CPress the {OK} key.

D Press 0 or 1 until "4. Key Op. Tools" is displayed.

EPress the {OK} key.

F Press 0 or 1 until "6. Line Type" is displayed.

6

GPress the {OK} key.

H Press 0or 1and select "Tone" or "Pulse".

IPress the {OK} key.

J Press the {User Tools} key to re- turn to the standby display.

67