Savin G1619 manual Canceling Transmission or Reception, B Press the Job Information key

2. Job Information

Canceling Transmission or Reception

Transmission files are originals that have been stored in memory and are awaiting transmission. The functions that produce transmission files are Memory Transmission and Polling Reception.

If you notice an error in the destina- tion specified or the document con- tent after scanning a document into memory, you can cancel transmission of that document. This is done by searching for the document in the fax machine's memory and deleting it.

Note

❒You can cancel Memory Transmis- sion even while files are being sent. However, any pages that have al- ready been sent cannot be can- celed.

❒To cancel transmission in progress, press the {Clear/Stop} key.

❒You can print out a File List to con- firm the transmission files stored in memory.

Reference

For details about Memory Trans- mission and Polling Reception, see Chapter 2 “Memory Transmis- sion” in the Basic Features manual, and p.5 “Calling to Request a Mes- sage (Polling Reception)”.

A Make sure that the machine is in Facsimile mode and the standby display is shown.

B Press the {Job Information} key.

Confirm that " 1. Cancel TX / RX " is displayed.

CPress the {OK} key.

D Display the file you want to can- cel.

To display the file, enter the file number with the number keys or press 0 or 1 until the file number is displayed.

Note

❒If you make a mistake, press the {Cancel} key and try again.

❒If you cannot find the file you want to cancel, the document has already been sent.

EPress the {OK} key.

F Confirm that you have selected the correct file, and press the {OK} key.

"Trans. Cancelled File Deleted " is displayed, and the machine re- turns to the standby display.

9