Savin G1619 manual Solving Problems, Reference, Required Action

4

66

Troubleshooting

Solving Problems

This table lists some common problems and their solutions.

Problem	Required Action
Image background appears dirty	Adjust the scan density.
when a fax is received at the other end.	Reference
	See p.25 “Image Density (Contrast)”
Printed or sent image contains spots.	The Document Feeder (ADF) or exposure glass is dirty,
	clean them.
	Make sure that ink or eraser is dry before setting the
	original.
	Reference
	See Chapter 5 “Maintaining Your Machine”in the
	Copy Reference
Received image is too light.	Request the sender to increase the image density.
	When using moist, rough or processed paper, the
	printed image may be partly invisible. Only use recom-
	mended paper.
	Reference
	See Appendix, “Originals” in the Advanced Fea-
	tures manual.
	When h appears on the display, toner is beginning to
	run out. Replace the toner cartridge soon.
	Reference
	See Chapter 3 “Changing the Toner Cartridge”in
	the Copy Reference.
Message appears blank at the other	The original was set upside down. Set it properly.
end.	Reference
	See p.13 “Setting Originals”
You want to cancel a Memory Trans-	If the original is being stored, press the {Clear/Stop} key.
mission.	Reference
	See p.19 “Canceling a Memory Transmission”
	If the original is being sent, use "Cancel TX/RX" in the
	Job Information menu.
	Reference
	See Chapter 2 “Canceling Transmission or Recep-
	tion” in the Advanced Features manual.
You want to cancel an Immediate	Press the {Clear/Stop} key.
Transmission.	Reference
	See p.23 “Canceling an Immediate Transmission”
You cannot add any destination in	67 destinations have been programmed with the num-
Group, even though it does not reach	ber keys. Program more numbers with Quick Dials or
the maximum number.	Speed Dials.
	Reference
	See p.49 “Groups”