Savin G1619 manual Deleting, is in Use. Cannot Delete. is

Quick Dial

JPress the {Clear/Stop} key, and then reenter the destination name.

Note

❒Under rare circumstances, gar- bled characters may appear

during name registration if you use the {Pause/Redial} key to display the fax number of par- ties located in other countries. If this happens, simply delete the

garbled characters using 0 or 1 and the {Clear/Stop} keys, and then go on to enter the name.

KPress the {OK} key.

The name is programmed.

L Press 0or 1to select either "On" or "Off".

Note

❒Label insertion allows the re- ceiver's name that is pro - grammed in Quick Dial or Speed Dial to be printed on the fax when it is received at the other end. See Chapter 1 “Label Insertion” in the Advanced Fea- tures manual.

MPress the {OK} key.

Deleting

The following procedure describes how to delete fax numbers registered in Quick Dial keys.

Limitation

❒When a Quick Dial key is being used for a standby Memory Trans-

mission, the message " This Dial

is in Use. Cannot Delete. " is	3
shown and you cannot delete the
destination for this key.

A Press the {User Tools} key.

B Press 0 or 1 until " 4. Fax Fea- tures " is displayed.

CPress the {OK} key.

If you want to store another Quick Dial, go to step E.

N Press the {User Tools} key to re- turn to standby display.

Confirm that " 1. Program / Delete " is displayed.

DPress the {OK} key.

41