Savin G1619 manual B Set the original, E Press the Start key

Memory Transmission

B Set the original.

Limitation

❒You can send the first pages from the exposure glass, and then the remaining pages from the Document Feeder. After you place the last page on the expo- sure glass, you have 60 seconds to insert the remaining pages in the Document Feeder.

❒Note that you cannot place pag- es on the exposure glass after you have started using the Doc- ument Feeder.

❒Do not open the Document Feeder while it is scanning in originals.

Note

❒Place the original you want to store in memory on the expo- sure glass or the Document Feeder. To store multiple page originals from the exposure glass, set them page by page.

Reference

p.13 “Setting Originals”

C Select any scan settings you re- quire. See p.24 “Scan Settings”.

D Dial. If you wish to send the same message to more than one desti- nation, press the {OK} key, and then dial another destination. Re- peat this step for all destinations.

If you make a mistake, press the {Clear/Stop} key, and then enter the correct number again.

Note

❒When specifying a destination using a Quick Dial, the destina-

tion is added even if you did not press the {OK} key.

Reference

p.26 “Dialing” 2

E Press the {Start} key.

The machine starts scanning the original.

The machine calls the destination. The name or fax number which is programmed as the Own Name or Own Fax Number at the other end is shown on the top of the display.

Reference

p.33 “Own Name/Fax Head- er/Own Fax Number”

After transmission, the machine will return to standby mode.

17