Savin G1619 manual A Make sure that the Memory Transmission indicator is lit

Faxing

Memory Transmission

Memory Transmission is convenient because:

• Fax documents can be scanned much more quickly. Your scanned

2document is stored in the memory, and then sent automatically, meaning you do not have to wait for your document to send.

•While your fax document is being sent, another user can operate the machine (people do not have to wait long to use the fax machine).

•You can send the same document to more than one place with the same operation. (Broadcasting)

•There are two kinds of Memory Transmission: Parallel and Nor- mal. See Chapter 3, "Parallel Mem-

or y T ra ns m is s ion" i n the Advanced Features manual.

Important

❒If there is a power failure (main power switch is off) or the plug is pulled out for more than 12 hours, all the files stored in memory are deleted. As soon as the main pow- er switch is turned on, the Power Failure Report is printed to help you identify deleted files. If you turn just the operation switch off, files are not deleted.

Limitation

❒If memory is full (0% appears on the display), Memory Transmis- sion is disabled. Use Immediate Transmission instead.

Note

❒Maximum number of Memory Transmission files: 133

❒Maximum number of destinations per Memory Transmission: 133

❒Combined total number of desti- nations that can be stored: 300

❒The theoretical maximum number of destinations you can enter with the number keys is 67, but this will depend on the amount of memory currently available.

❒The number of pages that you can store in memory depends on the original images and the scan set- tings. You can store up to 80 stan- dard pages (ITU - T #1 chart, Resolution: Standard, Original Type: Text).

❒You can set whether the machine returns to the default transmission mode after every transmission. You can change this so that the de- sired setting is maintained. See Chap ter 6 “ User Pa ra me - ters“(Switch 01, Bit 7) in the Ad- vanced Features manual.

A Make sure that the Memory Transmission indicator is lit.

If it is not lit, press the {Memory Trans.} key.

16