Savin G1619 manual Calling to Request a Message Polling Reception, Secured Polling Reception

Calling to Request a Message (Polling Reception)

Calling to Request a Message (Polling Reception)

Use this function if you want to poll a message from another terminal. You

Limitation

1

can also poll documents from many terminals.

Receiver	Sender
(This machine)
Transmission
Request
	ND1X01E8

There are two types of Polling Recep- tion:

❖Secured Polling Reception

❒Polling Reception requires that the other machine can perform Polling Transmission.

❒To receive a message sent by any Secured Polling Transmission or Stored ID Override Polling Trans- mission, it is necessary to specify the same Polling ID as the sender's.

❒To receive a message sent by Se- cured Polling Transmission or Stored ID Override Polling Trans- mission, the sender must be a ma- chine of the same manufacturer and equipped with the Polling Re- ception function.

Note

If the Polling ID is programmed in your machine, any messages wait- ing in the transmitting machine with the same ID are received. If the other machine does not have any messages waiting with the same Polling ID, any messages that do not require an ID are received (Free Polling).

❖Stored ID Override Polling Reception

You must enter an Override Poll- ing ID unique to this transmission. This ID overrides the Polling ID. Your machine will receive any messages waiting in the transmit- ting machine with matching ID's. If no ID's match, any messages that does not require an ID are received (Free Polling).

❒The communication fee is charged to the receiver.

A Make sure that the machine is in Facsimile mode and the standby display is shown.

BPress the {Transmission Option}key.

C Press 0 or 1 until " 3. Polling RX ” is displayed.

DPress the {OK} key.

5