Savin G1619 manual Using Groups, C Press the Speed Dial key, E Press the Start key

Dialing

CPress the {Speed Dial} key.

D Enter the two digit code (00 to 49) for the destination with the num- ber keys.

Note

❒When a name is stored for the destination, the name is dis- played, and when no name is stored, the fax number is dis- played.

❒If you wish to dial another des- tination, press the {OK} key and dial another fax number.

❒If you make a mistake, press the {Clear/Stop} key, and try again.

E Press the {Start} key.

Using Groups

You can store multiple destinations as a single Group and simply specify a particular Group.

You must store the destinations' fax
number in a Group beforehand.
	2
Additionally, you can store destina-
tion names and a Group name in
Groups.

The method for specifying Groups differs according to the way they were programmed.

•When programmed in a Quick Di- al: Press the Quick Dial key.

•When not programmed in a Quick Dial: First, Program the Group

function in a User Function key ({F1} to {F3}). When you want to specify a destination, press the User Function key in which the Group Function is programmed, and then press the Group number with the number keys. (See Chap- ter 5, "User Function Keys" in the Advanced Features manual.)

Limitation

❒Quick Dials programmed for Groups cannot be used for any oth- er function.

❒You cannot use Immediate Trans- mission to send Groups. You can only use Memory Transmission.

Note

❒To register, edit, or delete Groups, see p.49 “Groups”

❒To check the contents of all Groups, print the Group Dial list. See Chapter 5, "Printing Re - port/Lists" in the Advanced Fea- tures manual.

29