Savin G1619 manual Setting Originals

Setting Originals

Setting Originals

You can set your originals either in the Document Feeder or on the expo- sure glass. Some types of originals are unsuitable for the Document Feeder so they must be set on the exposure glass.

Which way you place your original depends on its size and whether you are using the Document Feeder or the exposure glass.

❖How to set A4, B5, A5, 51/2"⋅81/2", 81/2"⋅11, 81/2"x14" and 8"x13" size originals

❖How to set A5 and 81/2"⋅ 51/2"size originals

Note

❒When sending a fax, the image output at the other end depends on the size and direction of paper

used in the receiver's terminal. If	2
the receiver does not use paper of

the same size and direction as that of the original, the fax image size m ay b e redu ced on ou tput, trimmed at the both edges, or di- vided into two or more sheets. When sending an important origi- nal, we recommend that you ask the receiver about the size and di- rection of the paper used in their terminal.

❒Make sure that all ink, correcting fluid, etc., has completely dried be- fore setting your original. If it is still wet, the exposure glass will be marked and those marks will ap- pear on the received image.

❒You can set the original any time up until you press the {Start} key.

13