Savin G1619 When Specifying a Group with a Quick Dial, When Specifying a Group with the Group key

Faxing

When Specifying a Group with a Quick Dial

Make sure that the Memory Trans- mission indicator is lit, if not, press the {Memory Trans.} key to light it.

2 Note

❒ You must register Groups to Quick

D ia ls b e fo r eh a n d . S e e p . 49 “Groups”

A Make sure that the machine is in standby mode.

B Set your original and select any scan settings you require.

C Press the Quick Dial key in which the Group is programmed.

Note

❒If you make a mistake, press the {Clear/Stop} key and try again.

❒If you wish to dial another des- tination, press the {OK} key, and then dial another fax num- ber.

D Press the {Start} key.

When Specifying a Group with the Group key

Make sure that the Memory Trans- mission indicator is lit, if not, press the {Memory Trans.} key to light it.

Note

❒You must program the Group function in a User Function key be- forehand. See Chapter 5 “User Function Keys” in the Advanced Features manual.

A Make sure that the machine is in standby mode.

B Set your original and select any scan settings you require.

C Press the User Function key pro- grammed with the Group func- tion.

D Enter the Group number (1 to 5) with the number keys.

Note

❒If you want to specify another Group, press the {OK} key, and then repeat step C above.

❒If you make a mistake, press the {Clear/Stop} key, and the dis- play will return to that in step B.

E Press the {Start} key.

30