Savin G1619 manual ID Code, Polling ID, Memory Lock ID, Registering

Key Operator Settings

ID Code

Use this procedure to register the fol- lowing kinds of ID Codes:

Important

❒You can confirm ID Codes in the Parameter Settings list. We recom- mend you print a new list each time you register or change ID Codes.

❒You can edit registered ID Codes by performing the steps for regis- tering ID Codes in the following procedure. Display the ID Code

you want to change, and then press the {Clear/Stop} key and re- enter the ID Code.

❖Polling ID

6This ID is required for using De- fault ID Polling Reception. See p.5 “Calling to Request a Message (Polling Reception)”

Note

❒You can enter A to F by the Quick Dial keys.

❒You can enter 0 to 9 by the num- ber keys.

❒0000 and FFFF can not be en- tered.

❖Memory Lock ID

This ID is required for printing a message received using the Memo- ry Lock function. See p.12 “Print- ing a Memory-locked Message”.

Note

❒You can enter 0 to 9 by the num- ber keys.

❒0000 can not be entered.

Registering

To register ID Codes, perform the fol- lowing procedure.

The following example is for Memory Lock ID.

A Press the {User Tools} key.

B Press 0 or 1 until " 4. Fax Fea- tures " is displayed.

CPress the {OK} key.

D Press 0 or 1 until " 4. Key Op. Tools " is displayed.

EPress the {OK} key.

F Press 0 or 1 until " 5. ID Code " is displayed.

GPress the {OK} key.

H Press 0 or 1 until " 2. Memory Lock ID " is displayed.

IPress the {OK} key.

66