Samsung SF-370 Series manual LCD error messages

LCD error messages

Display	Status/Solution	Related to:
Adjust scanner first in Maintenance	The shading waveform to be used as a reference is corrupted due	Scanner
menu	to unknown reason. Adjust the scanner to fix this problem as
	described in "Shading adjustment" on page 8.4.
Check white paper document and try	The scanning level is too low to compare with reference level.	Scanner
again	To adjust shading, you should use the plain and white paper.
CID: No Number	The detected Caller ID has no information about phone number.	Fax/Telephone
CID: Number Error	The parity or checksum error was occurred in detected Caller	Fax/Telephone
	ID.
CID: Private	The detected Caller ID is defined as Private.	Fax/Telephone
Clean white roller, glass and try again	The scanning level is slightly low, which can affect the image	Scanner
	quality. To clean concerned parts, see "Cleaning the document
	scanner" on page 8.2.
Connect Tel Line	The machine automatically checks a telephone line status during	Fax/Telephone
	powering up whether it is correctly connected or not.
Duplicated with [Speed No.xx]	The same number has already been registered into another speed	Telephone
The ‘xx’ indicates the location	dial location.
number.
Exceeded Job Memory	The machine can hold 3 My Favorites but you tried to add more.	Fax
Exceeded Job Memory	The broadcasting and delayed fax can hold 5 jobs in total.	Fax
Cancel scheduled job and try again	Cancel scheduled job and try again.
Exceeded Total	The machine can hold up to 200 messages which include	TAM
Message Memory	Greetings, ICM (InComing Messages) and recorded	(SF-375TP only)
	conversations.
	Erase old messages to make a room in the memory.
ICM Memory Full	The voice memory is full. No more caller’s ICM (InComing	TAM
	Messages) can be recorded (Total recording time is about
		(SF-375TP only)
	30 minutes).
Ink Low. Install new ink cartridge	The print cartridge has run out of ink. To install a new Print
	Cartridge, see "Replacing the print cartridge" on page 8.3.
	Although this message is displayed, you can make a copy or	Cartridge
	print a report. But, stored data in memory can be printed by
	changing the cartridge.
Install ink cartridge	Print cartridge is not installed or improperly installed.	Cartridge
Invalid Time	The time you set for fax forwarding is wrong.	Fax
Job Not Assigned	You attempted to cancel the scheduled job but there is no jobs	Fax
	scheduled. You attempted to delete or print send the My
	Favorites document when there is no document stored.
Junk Fax Empty	You attempted to delete the junk fax number when there is no	Fax
	junk fax number.
Junk Fax Full	The machine can hold 20 junk fax numbers but you tried to add	Fax
	more.
Load Document	You have tried to send a fax and there is no document loaded	Document
	into the machine.
Load paper and press ok	You have tried to do any job and there is no paper loaded into the	Paper
	machine.

8.7

CARE AND	MAINTENANCE
CARE AND	MAINTENANCE