Lindy 25021 manual Product Specifications

6	PRODUCT SPECIFICATIONS
		Models	Twenty-Four (24) ports 100/10Mbps Fast Ethernet Switch
			(For 13 inches and 19 inches width)
		Standards	10BASE-T IEEE 802.3
			100BASE-TX IEEE 802.3u
		Ports	Twenty-four (24) 100BASE-TX
		Media Support	10BASE-T Category 3, 4 or 5 TP
			100BASE-TX Category 5 TP
		Bandwidth	100BASE-TX 200/100/20/10Mbps
		Forwarding /	148,810 packets/second per port @ 100Mbps, max.
		Filtering Rate	14,881 packets/second per port @ 10Mbps, max.
		Latency	9 ∝ sec @100Mbps, minimum
			70 ∝ sec @ 10Mbps, minimum
		MAC Addresses	8K six (6)-bytes entries maximum, self-learning
		Buffer Memory	2.5Mb
		Duplex Modes	Auto-Negotiation
		Crossover	All the TP ports support Auto-MDIX function
		LED Indicators	One (1) for Power
			One (1) per port for Link / ACT
			One (1) per port for Full-Duplex /Collision
		Power Supply	Full range Auto-Switching
			Input voltage: 100 ~ 240 +/-10% VAC/ 50 ~ 60 Hz
		Power Consumption	21.5 watt max
		Environment	Operating Temp: 0°	~ 45° C (32° ~ 113° F)
			Storage Temp: -20°	~ 70° C (-4°~ 158° F)
			Humidity: 10% ~ 90% non-condensing
		Certifications	FCC Class A
			CE Mark
		Dimensions	For 19 inches width:
			442x184x44mm(17.40x7.24x1.73inches)

FCC WARNING

This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference in a commercial environment.

Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

CE MARK WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

8