![](/images/new-backgrounds/1097350/9735047x1.webp)
TO REPLACE MOWER DRIVE BELT
MOWER DRIVE BELT REMOVAL
1.Park tractor on a level surface. Engage parking brake.
2.Lower attachment lift lever to its lowest position.
3.Disengage belt tension rod from lock
_bracket.
CAUTION: Belt tension rod is spring loaded. Have a firm grip on rod and re- lease slowly.
4.Remove screws from R.H. and L.H. mandrel covers and remove covers.
5.Remove any dirt or grass clippings which may have accumulated around
mandrels and entire upper deck sur- face.
6.Remove belt from electric clutch pulley, both mandrel pulleys and all idler pul- leys.
L.H.
Mandrel
Cover
Belt Tension | Locking |
Rod |
|
(Disengaged |
|
Position) |
|
Idler
Pulleys
MOWER DRIVE BELT INSTALLATION
1.Install belt around both mandrel pulleys and around idler pulleys as shown.
2.Install belt onto electric clutch pulley.
IMPORTANT: Check belt for proper rout-
ing in all mower pulley grooves.
3.Reassemble R.H. and L.H. mandrel covers. Securely tighten all screws.
4.Engage belt tension rod on locking bracket.
&CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and en- gage slowly.
5.Raise attachment lift lever to highest position.
Belt Routing
Bracket
Electric
Clutch
Pulley
R.H.
Mandrel
Cover
R.H.
Mandrel
24