Zhone Technologies IMACS-200 manual HSU Card Test Screen, HSU Port Test Screen

9.3.2HSU Card Test Screen

Selecting “Test” from the HSU Main Screen will access the Test Screen shown in Figure 9-5.From this screen, you can create test situations between HSU ports, or between a single port and test equipment at a remote site. Table 9-4lists the actions you can perform from the bottom line of this screen, and Table 9-5lists the settings presented on this screen, along with their possible and default values.

	Figure 9-5.HSU Port Test Screen
	Table 9-4. Test Screen Actions
Action	Function
Save	Saves changes to settings.
Undo	Returns all settings to the last saved state.
Refresh	Updates certain time-related information fields that are not automatically
	updated (i.e., performance and test data).
InsertErr	Allows you to manually insert a single error into the clear data signal.
Clear	Clears the Test Screen and resets all counters to zero.
Main	Returns to the HSU Main Screen. If changes are made to settings and not
	saved, you will be prompted to save or lose changes.

9-10 High Speed Data Ports